Fujitsu Lifebook E8410 User Manual page 72

U
SING HEAVY CURRENT DEVICES SUCH AS THE MODEM OR FREQUENT
ACCESSES MAY PREVENT CHARGING COMPLETELY
Low Battery State
When the battery is running low, a low battery notification message will appear. If you do not respond
to the low battery message, the batteries will continue to discharge until they are too low to operate.
When this happens, your notebook will go into Standby mode. There is no guarantee that your data
will be saved once the notebook reaches this point.
O
■
NCE THE LOW BATTERY NOTIFICATION MESSAGE APPEARS
L B
YOUR IFE
PROVIDE A CHARGED BATTERY
W
■
HEN YOU ARE IN
REMOVE ALL POWER SOURCES WHILE YOUR
BEEN SAVED TO THE HARD DRIVE WILL BE LOST
Dead Battery Suspend mode shows on the Status indicator just like the normal Standby mode. Once
your notebook goes into Dead Battery Suspend mode you will be unable to resume operation until you
provide a source of power either from an adapter, or a charged battery. Once you have provided power,
you will need to press the Power/Suspend/Resume button to resume operation.
In the Dead Battery Suspend mode, your data can be maintained for some time, but if a power source
is not provided promptly, the Power indicator will stop flashing and go out, meaning that you have lost
the data that was not stored. Once you provide power, you can continue to use your notebook while
an adapter is charging the battery.
S
OOK NOTEBOOK INTO TANDBY MODE UNTIL YOU CAN PROVIDE A NEW POWER SOURCE
, AC
AN POWER ADAPTER
S
TANDBY MODE THERE MUST ALWAYS BE AT LEAST ONE POWER SOURCE ACTIVE
67 - Lithium ion Battery
.
,
YOU NEED TO SAVE ALL YOUR ACTIVE DATA AND PUT
, A /A
OR UTO IRLINE ADAPTER AS SOON AS POSSIBLE
L B S
IFE OOK NOTEBOOK IS IN TANDBY MODE
.
DVD/CD-RW/CD-ROM
. Y
OU SHOULD
.
. I
F YOU
,
ANY DATA THAT HAS NOT