Fujitsu Lifebook E8410 User Manual page 206

To set the default identity, highlight the identity you want as default and click [Set as Default]; click
[Apply] to ensure the settings are saved. If you log in to OmniPass with a fingerprint device, you will
automatically be logged in to the default identity for that OmniPass user. You can choose the identity
with which you are logging in if you login using "master password".
Choosing User Identity during Login
To choose your identity during login, type your username in the User Name: field. Press [Tab] and
see that the Domain: field self-populates. Click the Password: field to bring the cursor to it, and you
will see the pull-down menu in the Identity: field. Select the identity to login as, then click OK.
Switch User Identity
To switch identities at any time, right-click the OmniPass system tray icon and click Switch User
Identity from the submenu. The Switch Identity dialog will appear. Select the desired identity and
then click OK.
Identities and Password Management
On the Manage Passwords interface of the Vault Management tab of the OmniPass Control Center,
there is a pull-down selection box labeled, Identity. This field lets you choose which identity you are
managing passwords for. When you select an identity here, only those password protected dialogs that
are associated with that identity are shown. You can perform all the functions explained in "Password
Management" on page 199.
201 - Appendix B: Fingerprint Sensor Device