Infrared Port
The Infrared IrDA (4Mbps) port allows for wireless data transfer between your notebook and other
IrDA-compatible devices, such as another computer or a printer, without the use of a cable. The
infrared port is located on the front of the system, adjacent to the wireless LAN switch
It is important to keep in mind that while carrying out this form of communication, both devices must
be placed so their infrared ports are directly facing each other without obstruction. The devices must
also be separated by at least 6" but no more than 36" for maximum performance.
The following conditions may interfere with infrared communications:
• A television, radio remote control unit, or a wireless headphone is being used nearby.
• Direct sunlight, fluorescent light, or incandescent light shines directly on the port.
•
D
O NOT MOVE EITHER DEVICE WHILE COMMUNICATION IS ACTIVE AS IT MAY INTERRUPT DATA TRANSMISSION
•
B
E CAREFUL NOT TO SCRATCH THE INFRARED PORT LENS
DEGRADE OPERATION
IEEE 1394 Port
The 4-pin 1394 port allows you to connect digital devices that are compliant with IEEE 1394 standard.
The IEEE 1394 standard is easy to use, connect, and disconnect. This port can allow up to 400 Mbps
transfer rate. A third-party application may be required to operate your device with the 1394 port
T
1394
HE
INTERFACE WITH DEVICES WHICH USE A SIX
ADAPTER
.
PORT USED IN THIS SYSTEM USES A FOUR
.
95 - Device Ports
. D
,
IRT
SCRATCHES
-
PIN CONFIGURATION
-
,
PIN CONFIGURATION
YOU WILL NEED TO PURCHASE AN
,
OR OTHER SURFACE MARKS CAN
.
. I
F YOU INTEND TO
.