ASROCK H670 PG Riptide Manual page 26

CPU/Water Pump Fan
Connector
(4-pin CPU_FAN2/WP)
(see p.1, No. 6)
ATX Power Connector
(24-pin ATXPWR1)
(see p.1, No. 11)
ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.1, No. 1)
ATX 12V Power
Connector
(4-pin ATX12V2)
(see p.1, No. 2)
4 3 2 1
GND
FAN_VOLTAGE
CPU_F AN_SPEED
FAN_SPEED_CONTROL
12 24
1 13
8 5
4
1
This motherboard provides
a 4-Pin water cooling CPU
fan connector. If you plan to
connect a 3-Pin CPU water
cooler fan, please connect it
to Pin 1-3.
This motherboard provides
a 24-pin ATX power con-
nector. To use a 20-pin ATX
power supply, please plug it
along Pin 1 and Pin 13.
This motherboard provides
an 8-pin ATX 12V power
connector. To use a 4-pin
ATX power supply, please
plug it along Pin 1 and Pin 5.
*Warning: Please make
sure that the power cable
connected is for the CPU
and not the graphics card.
Do not plug the PCIe power
cable to this connector.
Please connect an ATX 12V
power supply to this connec-
tor.
*The power supply plug fits
into this connector in only
one orientation.
*Connecting an ATX 12V
4-pin cable to ATX12V2 is
optional.
*For advanced overclocking
we suggest using this
connector together with
ATX12V1.
H670 PG Riptide
23