Security Menu - Setting The Security Features - Fujitsu Lifebook A3040 Software Manual

SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs and
to view the current data security configuration. Follow the
instructions for Navigating Through the Setup Utility to
make any changes. (See Navigating Through The Setup
Utility on page 1 for more information.)
The following tables show the names of the menu
fields for the Security menu and its submenus, all of
the options for each field, the default settings and a
description of the field's function and any special
information needed to help understand the field's use.
The default condition is no passwords required and
no write protection.
C A U T I O N
Entering a password incorrectly 3 times in a row will
cause the keyboard and mouse to be locked out and the
warning [System Disabled] to be displayed. If this
happens restart the computer by turning off and on the
power with the power switch and use the correct
password on reboot.
Main
Supervisor Password Is:
User Password Is:
Set Supervisor Password
Set User Password
Diskette access:
Password on Boot:
Power Management Security:
Fixed disk boot sector:
Fixed disk security
F1 Help
ESC Exit
PhoenixBIOS Setup Utility
Advanced Security
Primary Master:
Select Item -/Space
Select Menu Enter
Figure 10 Security Menu
P O I N T S
If you set a password, write it down and keep it in a
safe place. If you forget the password, you will have
to contact your support representative to regain
access to your secured functions and data.
If you make an error when re-entering the pass-
word a [Warning] will be displayed on the
screen. To try again press the Enter key and then
retype the password. Press the Esc key to abort the
password setting process.
Boot sector protection must be set to [Normal]
to install or upgrade an operating system.
Power Boot Info
Clear
Clear
Supervisor Password
[Enter]
controls access to the
[Enter]
setup utility.
[All]
[Disabled]
[Disabled]
[Normal]
[Disabled]
Change Values
Select Sub-Menu
A d v a n c e d M e n u
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
17