Removing And Installing The Battery; Removing The Battery; Inserting The Battery - Fujitsu Siemens Computers ESPRIMO Mobile D9500 Easy Manual

Removing and installing the battery

Notes Battery
Only use batteries approved by Fujitsu Siemens Computers for your notebook.
Never use force when inserting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
The illustrations shown below may differ from your actual device. They are
merely intended to clarify the principles involved.

Removing the battery

► Switch the notebook off and pull the power plug out of the mains socket.
Battery
► Close the LCD screen.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a stable, sturdy, flat surface. If necessary, lay an
anti-slip cloth on this surface to prevent the notebook from being scratched.
2

Inserting the battery

A26391-K230-Z120-1-7619, edition 2
1
3
1 2
1
Ports and operating elements
► Push the battery lock in the direction of
the arrow (1) as far as it will go.
► Slide the locking device in the direction of
the arrow (2) and hold it in place.
► Remove the battery from the notebook
in the direction of the arrow (3).
► Place the battery in the battery compartment
so that the contacts enter first (1).
Battery
► Push the battery into the battery
compartment until you feel it click into place.
► Push the battery lock in the direction of
the arrow (2) up to the stop.
15