Settings In Bios Setup Utility; Start Bios Setup Utility - Fujitsu Siemens Computers AMILO Xi 1546 Operating Manual

Settings in BIOS Setup Utility

In BIOS Setup Utility you can set the system functions and the hardware configuration of the
notebook.
When it is delivered, the notebook is set to factory default settings. You can change these settings in
BIOS Setup Utility. Any changes you make take effect as soon as you save and quit the BIOS Setup
Utility.
The BIOS Setup Utility programme contains the following menus:
Main: For system settings such as time and date and information about the notebook
For system information such as BIOS version, processor and notebook identification
Info:
Advanced: For system settings such as interfaces, keyboard and hard disks
For security settings such as the password
Security:
Power: For setting the energy saving functions
For specifying the start order
Boot:
Exit: For saving the changes and terminating the BIOS Setup Utility

Start BIOS Setup Utility

► Reboot the notebook (switch off/on or reboot operating system).
The following or a similar display appears on the screen during booting:
F2: Setup F12: Boot Menu
► When this message appears, press the function key F2 .
If a password has been assigned:
i
► Enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator or contact our
customer service centre.
10600690747, edition 1 69