Troubleshooting - Canon imageCLASS MF5770 Remote Ui Manual

Canon copier user manual
Hide thumbs Also See for imageCLASS MF5770:
Table of Contents

Advertisement

Cause 3
Remedy
Cause 4
Remedy
3
3-2

Troubleshooting

The computer that is printing is not properly set up.
Check the following:
Confirm that the proper printer driver is installed. Check if you are printing
from Windows 98/Me, each computer must have a printer driver installed. For
instructions on installing printer drivers, see the Software Guide.
Confirm that the correct printer is set as the output destination for the
computer that is printing. Check the output destination for the Printer in the
Control Panel or Print Manager.
The name of the file being printed is too long.
Normally LPR (or the Microsoft TCP/IP Printer, if you are using Windows 2000/
XP/Server 2003) sends jobs either under the name of the application software
used for printing, or the file name. However, a job name longer than 255
characters cannot be sent to the printer. To correct this problem, rename the file
with a shorter name.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mf5750 - imageclass b/w laserImageclass mf5730

Table of Contents