Table of Contents
Advertisement
•
Left selection
key,
Right selection key
shortcuts that open from the left and right selection
keys in the standby screen. Press joystick, select a
function from the list, and OK.
•
Navigation key
right,
Navigation key
key
down,
Navigation key
up,
Selection
key
— Change the shortcuts that open when you
scroll to different directions. Press the joystick, select
a function from the list, and OK. These settings are
not available if you select
Active standby
Display settings
Select Display, and define the following:
•
Light sensor
— Adjust the amount of light required
to illuminate the device display. Press joystick, scroll
right or left, and select OK.
•
Power saver time-out
— Select the amount of time
before the screen saver is activated. Press the
joystick, scroll right or left, and select OK.
•
{No display_text mapping for
'qtn_backlight_time_out', locale='en'}
quickly after last keypress the display dims. Press the
joystick, scroll right or left, and select OK.
Call settings
Select
Call
settings, and define the following:
•
Send my caller ID
— Select
Yes
to display your phone
number to the person you are calling or
network
to let the network to determine whether
your caller ID is sent.
— Change the
•
Send my Int. call ID
to display your Internet caller ID to the person you
are calling.
•
Call waiting
— Select
left,
Navigat.
incoming call while you have a call in progress, or
Check status
to check if the function is active on the
network.
•
Internet call waiting
notified of a new incoming call while you have an
> On.
internet call in progress.
•
Default call type
— Select
calls to the phone number or
call the number or address.
•
Reject call with SMS
message automatically to the person who is calling
you informing why you cannot answer their
incoming call.
•
Message text
— Enter the text that is sent when you
cannot answer an incoming call and want to
automatically send a text message as a reply.
•
Image in video call
still image to be displayed instead of a video during
— Set how
a video call or
None
video call.
•
Automatic redial
— Select
was busy at the first call attempt. Your device makes
a maximum of 10 attempts to connect the call.
•
Summary after call
approximate duration of the last call.
•
Speed dialling
— Select
on your device. Dial a phone number assigned to the
Set by
speed dialling keys (2 -9) by pressing and holding the
key.
See "Speed dial," p. 24.
— Set this feature on if you want
Activate
to be notified of a new
— Activate this feature to be
Cellular
to make normal
Internet
to use VoIP to
— Select
Yes
to send a text
— Select
Use selected
to select a
to not send any image during a
On
to redial a number if it
— Select
On
to briefly display the
On
to activate speed dialing
85
Advertisement
Table of Contents
