Make Calls; Speed Dial - Nokia RM-49 User Manual

Make calls

When the device is locked, calls still may be possible to
the official emergency number programmed into your
device.
In the offline profile, you may need to enter the lock
code and change the device to a calling profile before
making any call, including a call to an emergency
number.
To make and receive calls, the phone must be switched
on, the device must have a valid SIM card installed, and
you must be located in a service area of the cellular
network. The GPRS connection is put on hold during
voice calls unless the network supports dual transfer
mode.
Enter the phone number, including the area code, and
press the call key. If you enter an incorrect character,
press the clear key.
Tip: For international calls, press the * key
twice to add the + character that replaces the
international access code, and enter the
country code, area code (omit the leading 0, if
necessary), and phone number.
To end the call or cancel the call attempt, press the end
key.
To make a call using the saved contacts, press
Contacts in standby mode. Enter the first letters of the
name, scroll to the name, and press the call key. See
"Contacts," p. 33.
24
Press the call key to view up to 20 numbers that you last
called or attempted to call. Scroll to the desired number
or name, and press the call key to dial the number.See
"Log," p. 26.
To adjust the volume of an active call, scroll left or right
with the joystick.
To call your voice mailbox (network service) in standby
mode, press and hold the 1 key, or press the 1 key then
the call key.

Speed dial

Speed dialing allows you to make a call by pressing and
holding a number key.
Before using speed dialingl, select Menu
Settings Call settings Speed dialling, and ensure
> >
that Speed dialling is set to On.
To assign a number key to a phone number, select
Menu Tools Speed dial. Scroll to the number key
> >
(2 - 9) on the screen, and select Options > Assign. Select
the desired number from the Contacts directory.
To delete the phone number assigned to a number key,
scroll to the speed dialing key, and select
Undo.
To modify a phone number assigned to a number key,
scroll to the speed dialing key, and select
Change.
Tools
> >
Options
>
Options
>