Write Text - Nokia RM-49 User Manual

An infrared connection is active. If the indicator
blinks, your device is trying to connect to the other
device, or the connection has been lost.
Your device is connected to a PC with a USB data
cable.
All calls are forwarded to another number.
and Indicate the phone line that you have
selected, if you have subscribed to two phone lines
(network service).
You have missed a phone call.
An alarm is active.
, , A headset, music stand, hands-free car
kit, or loopset is connected.
A GPRS connection is active.
A data call is active.
IP passthrough is active.
Your device is synchronizing.
You have an ongoing push to talk connection.
16

Write text

Traditional text input
is shown on the top right of the display when you
are writing text using traditional text input.
and indicate the selected case.
indicates that the first letter of the word is written in
uppercase and all the other letters will automatically be
written in lowercase. indicates number mode.
• Press a number key 1–9 repeatedly until the desired
character appears. There are more characters
available for a number key than are printed on the
key.
• To insert a number, press and hold the number key.
• To switch between letter and number mode, press
and hold #.
• If the next letter is located on the same key as the
present one, wait until the cursor appears, and enter
the letter.
• To erase a character, press the clear key. Press and
hold the clear key to clear more than one character.
• To access the most common punctuation marks,
press the 1 key. Press 1 repeatedly to reach the
desired punctuation mark. Press * to open a list of
special characters. Use the joystick to move through
the list, and select a character.
• To insert a space, press 0. To move the cursor to the
next line, press 0 three times.