Lcd Monitor - Canon Leather Soft Case 70 Advanced User's Manual

LCD monitor

Nothing displays
LCD monitor is set to Off.
The LCD monitor will shut off during shooting.
If [Power Saving] is set to [Display Off], the power saving function
will shut down the LCD monitor while shooting in
Camera screen is black at start-up
Incompatible image has
been selected as the
start-up image in the My
Camera settings.
The display darkens.
The image in the LCD
monitor will darken in
strong sunlight or bright
light.
Display flickers.
Display flickers when
shot under fluorescent
lighting.
A bar of light (red, purple) appears on the LCD monitor.
This may occur when
shooting a bright subject,
such as the sun or a light.
Press the DISP. button to turn on the
LCD monitor (p. 12).
Change the start-up image in the My
Camera settings (p. 109) or use the
supplied software program
ZoomBrowser EX or ImageBrowser
to restore the default settings. See
ZoomBrowser EX/ ImageBrowser
Software User Guide (PDF).
This is a normal occurrence in
devices containing CCDs and does
not constitute a malfunction. (This
image will not be recorded when
shooting still images, but it will be
recorded when shooting movies.)
This is not a camera malfunction
(flickering recorded in movies, but
not in still images).
This is a normal occurrence in
devices containing CCDs and does
not constitute a malfunction. This bar
of light will not be recorded when
shooting still images, but it will be
recorded when shooting movies.
mode.
113