Taking Photographs With Another Brand Of Extension Flash - Olympus CAMEDIA C-3030ZOOM Instructions Manual

Note:
• Unless OFF is selected in All Reset, the setting will be canceled and reset
to the default when the power is turned off. (p. 188)
• The extension flash may occasionally fire by mistake.
• Be sure to use the exclusive grip and bracket cable to make connections
between the FL-40 and the camera. If another method is used, the FL-40
will only function as an ordinary extension flash.
TAKING PHOTOGRAPHS WITH ANOTHER
BRAND OF EXTENSION FLASH
Another brand of extension flash can also be used with the exclusive grip
and bracket cable. However, it can only be operated in the Auto mode.
For details about the conditions in which an extension flash may be
used, see "Other brands of extension flash that can be used". (p. 89)
Extension flash
connection terminal
7
If a picture is taken without
pressing the OK button, the
setting will remain in effect
until the Menu button is
pressed again.
• Press the OK button to save
the setting and cancel the
Menu.
1
Mount the extension flash on
the exclusive grip, then fasten
it to the camera's tripod hole
and connect the exclusive
bracket cable to the camera's
extension flash connection
terminal.
87