Using A Personal Computer - Olympus CAMEDIA C-3030ZOOM Instructions Manual

USING A PERSONAL
COMPUTER
1
Make sure that the power of the personal computer and the
camera are OFF.
2
Connect the provided USB cable or RS-232C PC serial cable to
your computer. (See the previous page for details)
3
Remove the lens cap, and connect the cable to the camera's
USB connector or computer connector, then turn on your
computer.
4
Set the Mode dial on the camera to
5
Start CAMEDIA Master on the computer.
Note:
• If you are using a USB cable to make connections, make sure that your
personal computer support it. Contact your personal computer maker
concerning your personal computer's environment.
• Communications with a personal computer cannot be accomplished with
a USB cable alone. Be sure to download images using CAMEDIA Master.
• If a USB connection is used, make sure that USB is operating normally on
the personal computer. For more information, consult your personal
computer's operation manual.
USB connector
Computer
connector
(RS-232C)
.
177