Olympus CAMEDIA C-3030ZOOM Instructions Manual page 218

Hide thumbs Also See for CAMEDIA C-3030ZOOM:
Table of Contents

Advertisement

TROUBLESHOOTING (Cont.)
Image protect, Single-erase, All-frame erase or Card format cannot
be performed.
1
A write-protect adhesive seal is affixed to the card.
[
Use the card after peeling off the seal. Do not reuse the write
protect seal. (P. 115)
PROBLEMS WITH IMAGES
The picture is out of focus
1
The camera moved when the shutter button was pressed.
[ Hold the camera correctly, and press the shutter button.
(P. 32/33)
2
The viewfinder's autofocus mark was not positioned on the subject.
[ Position the autofocus frame on the subject, or use the focus
lock. (P. 47/125)
3
The lens is dirty.
[ Clean the lens with a soft dry cloth.
4
The mode was not selected correctly.
[ Shoot with the Macro mode when the subject is within the range
of 0.2 m ~ 0.8 m. For further distances, shoot with the Standard
mode. (P. 50/63)
5
The Shutter release button was pressed while atanding in front of the
camera in the Selftimer mode.
[ Press the Shutter release button while looking into the viewfinder,
not while standing in front of the camera. Or, use the remote
control. (P. 70/132)
6
The Manual focus was used with the wrong focal range.
[ Use the right Manual focus for the distance. (P. 65/129)
The picture is too dark.
1
The flash was blocked by a finger.
[ Hold the camera correctly, keeping your fingers away from the
flash. (P. 32)
2
The subject was out of the working range of the flash.
[ Shoot within the flash working range. Or, use an extension flash.
(P. 58/86)
3
The flash mode was set to the Off mode.
[ Check the flash mode before shooting. (P. 58)
218

Advertisement

Table of Contents
loading

Table of Contents