Table of Contents
Advertisement
1-6
MC3000 User Guide
Beeper
Display
Scan LED
Indicator
(red/green)
Trigger
Mobile Computer Startup
To start using the mobile computer:
• Install the main battery.
• Charge the main battery and the backup battery.
• Start the mobile computer.
Install Main Battery
If the main battery is charged, the mobile computer can be used immediately. If the main battery is not charged, see
on page
1-9. To remove the main battery, see
To install the main battery:
1. Rotate the latches to the open position.
Do not lift up on the latches when removing the Strap/Door Assembly. Lift up on the Hand Strap only.
2. Pull on the strap to lift the Strap/Door Assembly off, bottom first.
Scan LED
Charge LED
Indicators
Indicator
(red/green)
(amber)
Figure 1-4. MC3000-G Mobile Computer
Main Battery Removal on page
Indicator LED Bar
Scan Button
Keypad
Power
1-12.
Battery Charging
Advertisement
Table of Contents
