Cycle Selection - Frigidaire GLET1142CS0 Operating Instructions

Before Operating Your Washer
Read your Owner's Guide. It has important safety
and warranty information. It also has many
suggestions for best washing results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your Owner's Guide
before operating this appliance.
Operating Steps
Read Washing Procedures in your Owner's
Guide. It explains these operating steps in detail.
1. Sort laundry into loads that can be washed
together.
2. Prepare items for washing.
3. Pretreat stains and heavy soil.
4. Add the measured amount of detergent to
wash tub.
Printed in U.S.A.
Laundry Center Washer Operating Instructions
5. If desired, add liquid bleach to Bleach
Dispenser.
6. Add laundry load to wash tub.
7. If desired, add liquid fabric softener to Fabric
Softener Dispenser.
8. Set cycle selector and washer controls
according to type, size, and soil level of each
load.
9. Close lid and pull cycle selector knob to start
washer. The washer will fill with water, but will
not agitate or spin with the lid open.
10. Remove items at end of cycle. Wait about 2
minutes for safety lid lock to release.

Cycle Selection

Always follow instructions on fabric care labels.
The Regular/Whites, Perm Press/Colors and Knits/
Delicates cycles provide a spray rinse during the
first spin, followed by a deep rinse and final spin.
Regular/Whites Cycle
This cycle provides up to 15 minutes of normal wash
agitation followed by a fast spin for most fabrics.
Extra Rinse Cycle
Use the Extra Rinse cycle after a complete wash
cycle when an additional rinse is desired. It provides
3 minutes of rinse agitation, followed by a spin at the
selected wash water temperature.
Select extra rinse by pushing in the cycle selector
knob and turning it clockwise to Extra Rinse. Pull
out knob to start.
Perm Press/Colors Cycle
This cycle provides up to 12 minutes of normal wash
agitation followed by a fast spin for cottons and
blends with a no-iron finish.
• Select the Perm Press Prewash setting to help
loosen soil and remove stains before washing. Add
recommended amount of detergent and other laundry
products desired to tub. Add load. Select a cold
water rinse and appropriate load size. Load will
agitate 4 minutes, drain and spin. Follow Perm Press
Prewash with a complete Perm Press/Colors cycle.
P/N 134317700 (0310)