National Instruments PXIe-4162 Getting Started Manual page 7

A LED Access Status indicator
B LED Voltage Status Indicator
Status Indicator
(Off)
Green
Amber
Status Indicator
(Off)
Green
Red
Pinout
The following figure and table provide detailed signal information for the PXIe-4162
connector.
Table 1. LED Access Status Indicator
Table 2. LED Voltage Status Indicator
All device outputs are disconnected from their voltage generation sources
through output disconnect relays.
At least one device output is connected to a voltage generation source.
The device has a fault or is in error due to the voltage generated or
measured by the device. Refer to the driver software for possible sources.
The device will not operate until the error is cleared and/or the device is
reset.
Item
Not Powered
Powered
Device is being accessed
Output Channel State
PXIe-4162 Getting Started Guide | © National Instruments | 7
Device State