Table of Contents
Advertisement
If an alarm time is selected, the Parent Unit will beep for about 45 seconds
after every 6, 4 or 2 hour period.
4.6
Temperature
M
1. Press the
button and the menu bar will pop up.
<
2. Press the
LEFT button or
+
3. Press the
UP button or
4.7
Camera Control
4.7.1 Add (pair) a camera
M
1. Press the
button and the menu bar will pop up.
<
2. Press the
LEFT button or
The
+
3. Press the
UP button or
button to confirm.
+
4. Press the
UP button or
and press the O button to start searching for a camera unit.
The green audio level LED will flash rapidly while searching.
5. Press and hold the PAIR button underneath the Baby Unit until the Parent
Unit finds the camera, beeps and the picture from the camera appears.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.7.2 View a camera
M
1. Press the
button and the menu bar will pop up.
<
2. Press the
LEFT button or
The
+
3. Press the
UP button or
O button to confirm.
+
4. Press the
UP button or
press the O button to view the picture from that camera.
14
>
RIGHT button until
-
DOWN button to select ºC or ºF.
>
RIGHT button until
menu will pop up.
-
DOWN button to select add, and press the O
will pop up.
-
DOWN button to select the desired Camera,
>
RIGHT button until
menu will pop up.
-
DOWN button to select view, and press the
will pop up.
-
DOWN button to select desired Camera, and
is highlighted.
is highlighted.
is highlighted.
Parent Unit Menu Options
Advertisement
Table of Contents
