3.
Using the video baby monitor
3.1
Zoom in / out the screen
Press OK on the parent unit to zoom in the screen during monitoring your
baby. Press OK again to zoom out the screen .
3.2
Adjust the brightness on the parent unit
Press MENU on the parent unit. The status bar pops up and
1.
highlighted. Then press OK.
2. Scroll the navigation button to select the brightness level. There are 5 levels
to choose from.
3.3
Set the alarm timer
You can set timers on the parent unit to remind you or caregivers of the time
to feed the baby, change the baby's diaper or put the baby to bed.
Press MENU on the parent unit. The status bar pops up.
1.
2. Scroll the navigation button to
3. Scroll the navigation button to select ON (or OFF to deactivate). Press OK.
If the next feeding time is 2 hours (or 3 / 4 / 5 / 6 hours) later, select 2h (or
3h / 4h / 5h / 6h hours). Press OK to confirm. When activated,
displayed when the screen is idle.
4. The parent unit will beep when the time limit is reached. Press OK to stop
the timer.
3.4
Monitor the room temperature
The baby (camera) unit has a temperature sensor that can detect the baby
room temperature. If the detected temperature goes outside a selected
temperature range, you can set the parent unit to emit an alert tone and
show a warning message on the screen. You can change the settings for the
temperature format, range, and alert as follows:
3.4.1
Set the temperature alert on or off
You can set whether to receive a visual and audible alert when the room
temperature goes outside the selected temperature range.
Press MENU on the parent unit. The status bar pops up.
1.
2. Scroll the navigation button to
3. Scroll the navigation button to select !. Then press OK.
4. Scroll the navigation button to select ON or OFF. Then press OK to
confirm.
14
. Then press OK.
. Then press OK.
Using the video baby monitor
is
will be