Table of Contents
Advertisement
Programmes
Cottons Flex 60°C
Cottons Flex 40°C
Cottons 60°C
Synthetics 40°C
Delicates 40°C
Wool/Handwash
30°C
2)
1) At the end of spin phase.
2) Not available for some models.
OPTIONS
TEMP
Set this option to change the default temperature.
Indicator
= cold water.
The display shows the set temperature.
SPIN
With this option you can decrease the default spin
speed.
The display shows the indicator of the set speed.
Additional spin options:
No Spin
•
Set this option to remove all spin phases.
•
Set it for very delicate fabrics.
•
The rinse phase uses more water for some
washing programmes.
•
The display shows the indicator
Rinse Hold
•
Set this option to prevent the laundry creases.
•
The washing programme stops with the water in
the drum. The drum turns regularly to prevent
the laundry creases.
•
The door stays locked. You must drain the water
to unlock the door.
•
The display shows the indicator
To drain the water refer to 'At the end
of the programme'.
10
Energy con-
Load (kg)
sumption
(kWh)
7
1.7
7
1.1
7
1.090
3
0.75
3
0.50
2
0.25
.
.
Approximate
Water con-
programme
sumption (li-
duration (mi-
tre)
75
75
55
60
60
55
Night Cycle
•
Set this option to remove all spin phases and to
perform a silent washing.
•
The rinse phase uses more water for some
washing programmes.
•
The related indicator comes on.
•
The washing programme stops with the water in
the drum. The drum turns regularly to prevent
the laundry creases.
•
The door stays locked. You must drain the water
to unlock the door.
•
The display shows the indicator
To drain the water refer to 'At the end
of the programme'.
TIME MANAGER
When you set a washing programme, the display
shows the default duration.
Press
or
to decrease or increase the
programme duration.
The Time Manager is available only with the
programmes in the table.
Remaining
moisture (%)
nutes)
210
60
200
60
240
60
150
37
110
37
75
32
.
1)
Advertisement
Table of Contents
