Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZWF725B4PW
Summary of Contents for Zanussi ZWF725B4PW
- Page 1 User Manual GETTING STARTED? EASY. ZWF725B4PW EN User Manual Washing Machine...
-
Page 2: Safety Information
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. -
Page 3: Safety Instructions
staff kitchen areas in shops, offices and other working – environments; by clients in hotels, motels, bed & breakfast and other – residential type environments; areas for communal use in blocks of flats or in launderettes. – Do not exceed the maximum load of 7 kg (refer to the •... -
Page 4: Electrical Connection
• Make sure that there is air circulation between • When unpacking the appliance, It is possible to the appliance and the floor. see water flowing from the drain hose. This is • When the appliance is in its permanent position, due to the testing of the appliance with the use check if it is levelled correctly with the aid of a of water in the factory. -
Page 5: Product Description
springs, washing drum, drum spider and related • Disconnect the appliance from the mains ball bearings, heaters and heating elements, electrical and water supplies. including heat pumps, piping and related • Cut off the mains electrical cable close to the equipment including hoses, valves, filters and appliance and dispose of it. -
Page 6: Technical Data
The rating plate reports the model name (A), product number (B),electrical ratings (C) and se- rial number (D). Mod. xxxxxxxxx Prod.No. 910000000 00 000V ~ 00Hz 0000 W 00000000 TECHNICAL DATA Dimension Width/ Height/ Total depth 59,6 cm /84,7 cm /57,7 cm Electrical connection Voltage 230-240 V... -
Page 7: Information For Installation
INFORMATION FOR INSTALLATION CAUTION! Do not lay washing machine on its front. Positioning and levelling Adjust the appliance correctly to prevent vibration, 3. Put the appliance back into an upright position. noise and movement of the appliance when it Remove the power supply cable and the drain operates. - Page 8 4. To a stand pipe with vent hole - Insert the drain You can extend the drain hose to hose directly into a drain pipe. Refer to the maximum 400 cm. Contact the illustration. authorised service centre for the other drain hose and the extension.
-
Page 9: Installation On Suspended Flooring
FIXING PLATE KIT If you install the appliance on a plinth that is not an accessory supplied by ZANUSSI, secure the appliance in the fixing plates. Read carefully the instructions supplied with the accessory. -
Page 10: Special Features
CONTROL PANEL SPECIAL FEATURES off the clothes to be drained out with the water, in such a way that there is no need to access this Your new washing machine meets all modern area for regular maintenance and cleaning. Refer to requirements for an effective treatment of laundry chapter 'Care and Cleaning' for best maintenance with low water, energy and detergent consumption... -
Page 11: Programme Chart
DISPLAY A. The time area: • Programme time. • The alarm codes. Refer to the chapter “Troubleshooting” for their description. • The level of the FlexiTime B. The Delay Start indicator. C. The Child Lock indicator. D. The Door Lock indicator: •... - Page 12 Reference spin Programme speed Maximum Programme description Default temperature Spin speed load (Type of load and level of soiling) Temperature range range Sportswear 1200 rpm 3 kg Synthetic and delicate items. Lightly soiled 30 °C (1200- 400 items or items to refresh. 40°C - Cold rpm) Spin/Drain...
- Page 13 Reference spin Programme speed Maximum Programme description Default temperature Spin speed load (Type of load and level of soiling) Temperature range range 60min EasyWash 1200 rpm 5 kg Cotton and fast-coloured synthetic items. 30°C (1200- 400 Complete washing programme that, in only 60 60°C - 30°C rpm) minutes, washes the daily soiled laundry inten-...
- Page 14 Programme ■ ■ ■ ■ ■ ■ ■ Sportswear ■ ■ ■ Spin/Drain ■ ■ ■ ■ ■ Rinse ■ ■ ■ ■ ■ ■ ■ Dark Colours ■ ■ ■ ■ ■ ■ CleanBoost ■ ■ ■ ■ 14min Refresh ■...
-
Page 15: Extra Rinse
Universal Liquid Univer- Liquid for col- Delicates Programme Special oureds woollens powder 60min Easy- ▲ ▲ ▲ Wash 1) At temperature higher than 60 °C the use of powder detergent is recommended. ▲ = Recommended -- = Not recommended OPTIONS This option is recommended for heavily soiled TEMP. -
Page 16: Permanent Extra Rinse
suitable for a full load of normally soiled The appliance empties the water out garments. automatically after 18 hours approximately. to wash items with daily soil (max. half load recommended). DELAY START to wash quickly items with almost no soil. With this option you can delay the start of a The FlexiTime is available only with the programmes programme to a more convenient time. -
Page 17: Before First Use
BEFORE FIRST USE 1. Connect the mains plug to the mains socket. During installation or before first use 2. Open the water tap. you may observe some water in the 3. Put a small quantity of detergent in the appliance. This is residual water left in compartment for washing phase. -
Page 18: Filling The Detergent And Additives
FILLING THE DETERGENT AND ADDITIVES Compartment for washing phase. If you use liquid detergent, put it immediately before you start the programme. Compartment for liquid additives (fabric conditioner, starch). Maximum level for quantity of liquid additives. Flap for powder or liquid deter- gent. -
Page 19: Starting A Programme Without The Delay Start
• The display shows the level of the Time Manager, the programme duration and the indicators of the phases of the programme. 2. If necessary, change the temperature and the spin speed or add available options. When you activate an option, the indicator of the set option comes on. -
Page 20: Interrupting A Programme And Changing The Options
OPENING THE DOOR WHEN THE DELAY You can cancel or change the set of START OPERATES the delay start before you press the While a delay start operates, the appliance door is . To cancel the delay start: locked and the indicator is on. -
Page 21: Hints And Tips
The energy saving status decreases the energy 1. Press . The appliance drains the water and consumption when the appliance is on the stand spins. 2. When the programme is completed, the door • All indicators and the display go off. lock indicator flashes for a few minutes. -
Page 22: Care And Cleaning
DETERGENT TYPE AND QUANTITY • sudsing, • reduced washing effect, The choice of detergent and use of correct • inadequate rinsing, quantities not only affects your wash performance, • a greater impact for the environment. but also helps to avoid waste and protect the environment: ECOLOGICAL HINTS •... - Page 23 Indicative periodic cleaning schedule: Always follow the instructions that you Descaling Twice a year find on the packaging of the product. Maintenance wash Once a month MAINTENANCE WASH Clean door seal Every two months The repeated and prolonged use of low temperature programmes can cause detergent Clean drum Every two months...
-
Page 24: Cleaning The Detergent Dispenser
Clean it when needed, using ammonia cream cleanser agent without scratching the seal surface. Always obey the instructions that you find on the packaging of the product. CLEANING THE DETERGENT DISPENSER CLEANING THE INLET HOSE AND THE VALVE FILTER... -
Page 25: Frost Precautions
45° 20° FROST PRECAUTIONS 5. When the drain pump is empty, install the inlet hose again. If the appliance is installed in an area where the temperature can be less than 0° C, remove the WARNING! Make sure that the remaining water from the inlet hose and the drain temperature is higher than 0 °C before pump. - Page 26 LEGEND Laundry load. h:mm Programme duration. Energy consumption. °C Temperature in the laundry. Litres Water consumption. Spin speed. Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g.
- Page 27 Approximate Remaining Energy con- Water con- programme moisture Standard cotton programmes. Load (kg) sumption sumption (li- duration (kWh) tres) (minutes) For Standard 40°C cotton: 0.59 Set Eco 40-60 at 30°C 1) At the end of spin phase. Off Mode (W) Left On Mode (W) 0.48 0.48...
-
Page 28: Troubleshooting
TROUBLESHOOTING WARNING! Refer to Safety chapters. ALARM CODES AND POSSIBLE FAILURES The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check. With some problems, the display shows an alarm code and the Start/ Pause button may flash continuously:... - Page 29 If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the washing machine check the table below for possible solutions. Problem Possible solution •...
-
Page 30: Environmental Concerns
Problem Possible solution Too much foam in the • Reduce the quantity of detergent. drum during the wash- ing cycle. After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. The necessary data for the service centre are on the rating plate. - Page 32 WWW.ZANUSSI.COM/SHOP...