Motherboard Board, Chassis Section - Sony MHC-V42D Service Manual

MHC-V42D
2-9.

MOTHERBOARD BOARD, CHASSIS SECTION

qs heat sink (MB-L)
Note 2: When installing the heat sink (MB-L),
spread the compound referring to
"NOTE OF REPLACING THE IC2002
ON THE MOTHERBOARD BOARD
AND THE MOTHERBOARD
MOUNTED PC BOARD" on servicing
notes (page 6).
qd four screws
(3.5 × 14), TAPPING
• Wire setting
front side
filament tape
chassis
qg Remove the chassis in
the direction of the arrow.
qf filament tape
4 CN2206 (8P)
5 CN107 (2P)
18
7 one screw
(M3)
2 CN2021 (6P)
- Rear view -
8 six screws
(+BVTP 3 × 8) (SILVER)
claw
qa two screws
(+BVTP 3 × 8)
(SILVER)
1 CN2007 (8P)
6 CN127 (3P)
Note 1: When the MOTHERBOARD mounted pc board
is replaced, be sure to refer to "DESTINATION
SETTING METHOD" on page 5.
9 Remove the
MOTHERBOARD board
in the direction of the arrow.
0 MOTHERBOARD board
• Wire setting
3 Remove the wires through
the chassis hole.
claw
qh chassis
chassis
SYS SET