Bonnet - TATA Motors TIGOR EV 2021 Owner's Manual

OPENING AND CLOSING

BONNET

Opening
WARNING
Always switch off the ignition before
opening the bonnet.
1. Make sure that the vehicle is in neutral
position with the parking brake applied.
2. Pull the bonnet release lever. The bon-
net will pop up slightly.
3. Raise the bonnet slightly and with your
finger slide the secondary lock lever lo-
64
cated under the bonnet centre to the
left side.
NOTE
Make sure that the wiper arms are not
raised before you lift up the bonnet to
avoid damaging the wiper arms and the
bonnet.
4. Lift the bonnet up. Pull the bonnet stay
rod from its clip and engage the free
end into the slot.
WARNING
Put the stay rod into the hole securely.
If the rod drops off, your body may be
caught below the bonnet.
Closing
1. To close the bonnet, hold the bonnet
by one hand, disengage the stay rod
and clamp it back properly.
2. Lower the bonnet close to the bumper,
and then let it drop down.