Tyres - TATA Motors TIGOR EV 2021 Owner's Manual

High-pressure Washing
High pressure washing is not allowed in
the motor bay and on the battery connec-
tors.
• When using high-pressure washers,
make sure to maintain sufficient dis-
tance from the vehicle. Insufficient
clearance or excessive pressure can
lead to component damage or water
penetration.
• Do not spray the camera, sensors or
its surrounding area directly with a high
pressure washer. Shock from high
pressure water may cause the device
to not operate normally.
• Do not bring the nozzle tip close to
boots (rubber or plastic covers) or con-
nectors as they may be dam-aged if
they come into contact with high pres-
sure water.

TYRES

Under Infla- Too much side tread
1
tion wear
Correct tyre
2 Uniform wear
pressure
Over Infla- Too much
3
tion center tread wear
MAINTENANCE AND SERVICES
Inflation
Do a check for inflation and condition of
your vehicle tyres periodically.
Examine the pressure in the tyres when
they are cold.
Keep the correct pressure in the tyres for
the best combination of riding comfort,
handling, tyre life and optimum perform-
ance.
Over inflation of tyres makes the vehicle
ride bumpy and harsh. Tyres are more
prone to uneven wear and damage from
road hazards.
Under inflated tyres reduce comfort, af-
fects handling and increases the operating
temperature, which can result in failure.
They also cause uneven wear and bring
down the performance of the car.
NOTE
Every time you check inflation pressure,
you should also examine tyres for dam-
age, trapping of foreign objects in the
treads and wear.
193