Yamaha EDL13000SDE Owner's Manual page 40

OPERATING THE GENERATOR
22
OPERATING PROCEDURE TO STOP
SUPPLYING THE ELECTRIC POWER
1
. Turn OFF all electrical device switches for
connected loads.
2
. Turn OFF the circuit breaker.
(1) Circuit breaker
3. Allow the engine to run with no load for
about 5 minutes before stopping the
engine completely.
4. Turn the main switch (key) to the "OFF"
position.
(1) Main switch (Key)
(A) "STOP"
(A)"OFF"
5
. Turn the fuel tank tap to the "OFF"
position.
(1) Fuel tank tap (A) "OFF"