Table of Contents
Advertisement
Chapter 4
Technical Specifications
Section 4.3
Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered with the RS920W.
d
Speed
10/100TX
10/100TX
d
Auto-negotiating.
e
Shielded or unshielded.
f
Auto-crossover and auto-polarity.
g
Typical distance. Dependent on the number of connectors and splices.
h
RMS 1 minute.
Section 4.4
Wireless Ethernet Port Specifications
The following sections detail specifications for wireless Ethernet ports that can be equipped on the RS920W:
•
Section 4.4.1, "Supported Wireless Standards"
•
Section 4.4.2, "Radio Characteristics"
•
Section 4.4.3, "Channel Allocations for IEEE 802.11b/g"
Section 4.4.1
Supported Wireless Standards
Standard
IEEE 802.11g
IEEE 802.11b
IEEE 802.11i
IEEE 802.1x
22
d
Connector
Duplex
DB9
FDX/HDX
RJ45
FDX/HDX
Parameter
54 Mbps (WLAN)
11 Mbps (WLAN)
Strong Encryption
Enhanced Encryption
Basic Encryption
Wireless Authentication
Wiring
e
Cable Type
Standard
> Category 5
TIA/EIA T568A/B
> Category 5
TIA/EIA T568A/B
Mode
Full Access Point
Client support
WPA2-AES (CCMP)
WPA-TKIP (RC4)
WEP (RC4)
Personal or Enterprise
RUGGEDCOM RS920W
Installation Guide
Maximum
f
g
Distance
100 m (328 ft)
100 m (328 ft)
Notes
2.4 GHz ISM
Backwards compatibility
Robust Secure Network (RSN)
Temporal keys
Up to 4 static keys
PSK or RADIUS
Copper Ethernet Port Specifications
h
Isolation
2.5 kV
2.5 kV
Advertisement
Table of Contents
