Table of Contents
Advertisement
Getting Started
6
Activating Your SKYFi2
To quickly begin enjoying XM Satellite
Radio with your SKYFi2,
follow these simple steps:
1. Set up your SKYFi2 Receiver using
the installation instructions included
in the SKYFi Home Adapter Kit,
SKYFi Vehicle Adapter Kit, Delphi
XM SKYFi Marine Adapter Kit, any
of the available audio systems, or
with the help of a professional
installer.
Warning: Failure to properly follow all
installation instructions could result in personal
injury, death, and/or damage to your SKYFi2
Receiver, accessories, and/or to your vehicle or
other property.
2. Press
to turn on your SKYFi2
and verify that it is playing channel
1, the XM Preview channel.
3. Select channel 0. The receiver's
eight-character XM Satellite Radio
ID will appear on the display. Write
the ID here:
Note: Carefully check your XM Radio ID.
The letters I, O, S, and F are not used.
4. Activate your XM Satellite Radio
service. To subscribe, make sure
you have your XM Satellite Radio
ID and a major credit card. Contact
XM at http://activate.xmradio.com
or by calling 1.800.XM.RADIO
(1.800.967.2346).
5. After subscribing, make sure you
keep your receiver on for at least
one hour in order to complete the
activation process. The process is
complete when you can access the
full channel lineup on your SKYFi2.
Warning: When using this product it is
always important to keep your eyes on the road
and your hands on the wheel. Failure to do so
could result in personal injury, death, and/or
damage to your SKYFi2 Receiver, accessories,
and/or to your vehicle or other property.
Advertisement
Table of Contents
