Delphi SA10101 User Manual page 23

To scan all presets:
1. Press the "menu" button. Select
"Search Mode, " then select
"Search by Scanning. " Return to
normal operation by pressing the
"menu" button.
2. Press the "preset/direct" button
to select one of the preset banks.
3. Press the "search" button.
SKYFi2 plays each preset channel
for 5 seconds, then advances to
the next preset.
4. Press the "search" button again to
stop scanning.
To scan all channels:
1. Press the "menu" button. Select
"Search Mode, " then select
"Search by Scanning. Return to
normal operation by pressing the
"menu" button.
2. Press the "preset/direct" button
to select direct mode.
3. Press the "search" button. SKYFi2
each channel for 5 seconds,
then advances to the next channel.
4. Press the "search" button again to
stop scanning.
Note: When searching, SKYFi2 does not
play any channel that you skipped using
the "Channel Skip/Add" feature. You can
always tune to these channels using the
scroll wheel or by direct entry.
23