Auto-On; Brightness And Contrast; Auto-Off And Sleep Timer - Delphi SA10101 User Manual

Auto On
Normally, SKYFi2 turns on whenever
it receives power. If SKYFi2 is wired
to a power source that is always on,
you should disable the "Auto-On"
option:
16
1. Press the "menu" button.
2. Use the scroll wheel (or remote) to
select "Auto-On. " Press the "XM"
button to confirm selection.
3. Select "Off. " Press the "XM"
button to confirm selection.
4. Press the "menu" button to return
to the main menu and then again
to return to normal operation. You
must now use the
turn SKYFi2 on or off.
Adjusting the Brightness
and Contrast
1. Press the "menu" button.
2. Use the scroll wheel (or remote) to
select "Brightness" or "Contrast. "
Press the "XM" button.
3. Use the scroll wheel (or remote) to
select the desired level. Press the
"XM" button to confirm.
4. Press the "menu" button to return
to the main menu and then again
to return to normal operation.
button to
Auto Off and Sleep Timer
You can set SKYFi2 to automati-
cally shut off between 15 min-
utes to three hours after your
last input or action. Use this fea-
ture if SKYFi2 continues to
receive power even after you
remove the ignition key; setting
Auto-Off prevents SKYFi2 from
draining the vehicle battery. You
may also use Auto-Off as a
"sleep" feature to turn SKYFi2
off automatically after a period of
time.