Adjusting The Audio Level - Delphi SA10101 User Manual

Note: If you are traveling long dis-
tances, you may need to repeat this pro-
cedure periodically if you hear interfer-
ence from local FM stations.This is due
to the differences in the strength of FM
stations being broadcast in these areas,
and not to any problems associated
with your SKYFi2.
In the rare situation that you can-
not find an acceptable open FM
frequency, consult a professional
audio installer.You may improve
the audio quality by using the
Delphi FM Direct Adapter
(SA10112), sold separately.

Adjusting the Audio Level

The factory default setting should
work well in most situations.
However, if you hear distortion,
you should decrease the audio
level. If the XM audio level is too
low compared to other sources
such as CD, cassette, or other FM
stations, you may want to
increase the audio level.
1. Press the "menu" button.
2. Use the scroll wheel (or
remote) to select "Audio
Level. " Press the "XM" button
to confirm.
3. Use the scroll wheel (or remote) to
select the desired level. Press the
"XM" button to confirm selection.
4. Press the "menu" button to return
to the main menu and then again
to return to normal operation.
Note: This is not a volume control. This fea-
ture should be used to better match the
SKYFi2 audio level with the other audio
sources in the receiver. Set the volume
using the audio system or FM radio con-
nected to your SKYFi2.
15