Table of Contents
Advertisement
To beam an application:
Open the Applications Launcher.
1.
Tap the Menu icon
2.
Tap App, and then tap Beam.
3.
Select either Handheld or Card from the Beam From pick list.
4.
Tap the application you want to transfer.
5.
Some applications are copy-protected and cannot be beamed. These are listed
with a lock icon next to them.
Tap Beam.
6.
When the Beam Status dialog box appears, point the IR port directly at the IR
7 .
port of the receiving handheld.
Wait for the Beam Status dialog box to indicate that the transfer is complete
8.
before you continue working on your handheld.
To receive beamed information:
Turn on your handheld.
1.
Point the IR port directly at the IR port of the transmitting handheld to open the
2.
Beam dialog box.
Select a category for the incoming information, create a new category, or leave
3.
the information unfiled.
Tap Yes.
4.
Tips on beaming information
You can set the full-screen pen stroke to beam the current entry.
See
You can draw the Graffiti Command stroke to activate the Command toolbar,
and then tap the beam icon.
You can use the Graffiti Command stroke "/ B" to beam the current entry.
Using your Computer Keyboard
If you have a lot of data to enter, or prefer to use the computer keyboard, you can
use Palm Desktop software or any supported PIM to enter information. You can
.
"Pen preferences"
in
Chapter 17
for more information.
Using your Computer Keyboard
27
Advertisement
Table of Contents
