Performing An Ir Hotsync Operation; Returning To Cradle Hotsync Operations - Palm i705 Handbook

Performing HotSync ®
Under Local Setup, select Infrared Port from the Port pop-up menu.
5.
Close the HotSync Software Setup window.
6.

Performing an IR HotSync operation

After you complete the steps to prepare for performing an IR HotSync operation, it is easy
to perform the actual operation.
To perform an IR HotSync operation:
In the Applications Launcher, tap the HotSync icon.
1.
Tap Local.
2.
Tap the pick list below the HotSync icon and select IR to a
3.
PC/Handheld.
Position the IR port of your handheld within a couple of inches of the infrared
4.
port of your computer.
Tap the HotSync icon to start the IR HotSync operation.
5.

Returning to cradle HotSync operations

It's easy to return to using the cradle for HotSync operations.
If your cradle is connected to a USB port, you can continue using it while HotSync
Manager is configured for infrared communication. Use the following instructions
to return to Local USB cradle HotSync operations only when needed, such as when
you have disconnected the cradle from the USB port.
160
Operations
Tap here to
start IR
HotSync
operation