Panasonic KX-TD500CE Features Manual page 240

1.11 Transferring Features
• Extension-to-CO Line Call
If a call between an extension and an outside party is established by this feature, the call
duration can be restricted depending on the setting of the system timer. <Section 2.5 System
Timer, "Extension-to-CO Line Call Duration Time" in the Programming Guide>
• Co-to-CO Line Call
If a call between two outside parties is established by this feature, the call duration is
determined by <Section 2.5 System Timer, "CO-to-CO Line Call Duration Time" in the
Programming Guide>.
An alarm tone is sent to both outside parties 15 seconds before the time-out. The call is
disconnected at the time-out.
Programming Guide References
• 2.3 Numbering Plan
–
• 2.4 Class of Service (COS)
– Trunk Group Setting
– Time Limit of Outside Calls
– Call FWD to CO
– Call FWD Follow me
• 2.5 System Timer
– Call Forwarding- No Answer Time
– Extension-to-CO Line Call Duration Time
– CO-to-CO Line Call Duration Time
• 2.8 System Option
–
–
• 4.3 Extension Line
– CO Key
– PF Key
• 4.4 DSS Console
– DSS Key
– PF Key
Features Guide References
1.3 System Features
• Limited Call Duration
3.1 E&M Features
• TIE Line and Outside (CO) Line Connection
User Manual References
• 2.5.1 Forwarding Your Calls (Call Forwarding)
• 4.1.2 Customising the Buttons
• 4.3.5 Flexible CO Button Assignment (005)
240
Call FWD - Do Not Disturb Set / Cancel
Special dial tone after setting feature
FWD / DND lamp pattern
Features Guide