Table of Contents
Advertisement
1.10 Holding Features
Call Park
Description
Allows the extension user to place a call on hold into a system parking area so that any
extension user can retrieve the call. This releases the user from the parked call to perform other
operations.
Conditions
• Up to 100 parking areas, numbered from 00 to 99, are available in the tenant. Up to 800 calls
can be parked at the same time in the system.
• Tenant Service
If "Tenant Service" is employed, each tenant can use up to 100 parking areas independently.
• Call Park Recall
If a parked call is not retrieved in a specific period of time, Call Park Recall rings back the
extension who parked the call.
• Automatic Disconnection
If a parked call is not retrieved in 30 minutes, it is automatically disconnected.
• Confirmation Tone
A confirmation tone is sent to the extension user who retrieved the parked call. Eliminating
the tone is programmable.
Programming Guide References
• 2.3 Numbering Plan
–
• 2.5 System Timer
– Call Parking Recall Time
• 2.8 System Option
– Confirmation tone for Call Pickup, Paging- Answer, TAFAS-Answer, Hold Retrieve
Features Guide References
None
User Manual References
• 2.4.1 Holding a Call
234
Call Park / Call Park Retrieve
and Call Park Retrieve
Features Guide
Advertisement
Table of Contents
