Appendix 1: Service Test Print - Canon iP4300 Simplified Service Manual

APPENDIX 1: SERVICE TEST PRINT

<EEPROM information contents>
On the service test print (sample below), confirm the EEPROM information as shown below.
Top area:
iP4300:
Vx.xx:
D = xxx.x:
USB (xxxxxx):
Middle area:
JPN:
Bottom area:
FA = xx xx xx:
CDR (+xxxxx, +yyyyy):
CDRS = (xxxx):
Temp. = xxx:
AB (K = OK Y = ...):
Note: For the ink amount in the ink absorber, confirm it in the EEPROM information print.
<Print check items>
On the service test print (sample below), confirm the following items:
- Check 1: Top of form accuracy, skewed paper feeding, left margin, and carriage accuracy
(outermost)
- Check 2: EEPROM information
- Check 3: Check pattern for horizontal dot mis-alignment
- Check 4: Check pattern for uneven printing due to uneven line feeding
- Check 5: Destination
- Check 6: LF correction value:
- Check 7: Check pattern for LF correction (the check pattern selected in the LF correction)
- Check 8: Check pattern for uneven printing due to carriage movement (9600 dpi mode)
- Check 9: Check pattern for uneven printing due to carriage movement (1200 dpi mode)
- Check 10: Check pattern for straight line accuracy
- Check 11: CD / DVD sensor and automatic print head alignment sensor correction
Model name
ROM version
Ink absorber counter value (%)
USB serial number
Destination
Reserved for plant use
CD / DVD sensor position correction value
CDR sensor correction value
Internal temperature
Ink system check result
All ink shall be ejected.
There shall be no remarkable streaks or unevenness.
The value selected in the LF correction is printed in cyan.
There shall be no remarkable unevenness.
There shall be no remarkable unevenness.
There shall be no remarkable dot mis-alignment on a line.
The result shall be OK.
33