Indicators - BenQ Installation Series User Manual

Indicators

Illustration
• Blank -: Light OFF
• : Light flashing
• : Light ON
LED
Power Temp Lamp
Power events
O O
-
O
-
O
G
-
G
-
Lamp events
- -
- -
- -
Status & Description
The projector has just been connected to a power outlet.
O
Stand-by mode.
-
(1) The projector needs 90 seconds to cool down as it was
abnormally shut down without the normal cooling down
process. Or
-
(2) The projector needs to cool for 90 seconds after the power
is turned off.
The Power indicator light is flashing during powering up.
-
The projector is under normal operation.
-
The lamp counter has developed a problem.
-
It is warning you that lamp usage has exceeded 3000 hours.
R
Replace the projection lamp with a new one immediately.
The lamp is not properly attached or the lamp is damaged.
R Please contact your dealer for assistance.
O
• : Orange light
• R: Red light
• G: Green light
Maintenance 53