Canon XH A1S Instruction Manual page 81

3 Using the HDV/DV Terminal
• When connecting the camcorder to a monitor or TV that supports DV input, you may need to carry out a
procedure on the monitor or TV to recognize the camera.
• If necessary, turn on the DV conversion and select whether to convert a tape recorded in HD to SD with the
following procedure (
Open the menu and select [SIGNAL SETUP]. Select [HD DOWN-CONV], select a setting
option and close the menu.
Using the A/V1 or VIDEO 2 Terminal
4
Open the terminal cover
* To use the VIDEO 2 terminal, connect the camcorder and TV using a BNC cable (commercially available).
We recommend powering the camcorder from a household power outlet.
TV sets equipped with the Video ID-1 System: Recordings made with a 16:9 aspect ratio (
will be played automatically in widescreen mode whether you connect the camcorder to the TV
using the A/V1 terminal or the VIDEO 2 terminal.
During fast forward playback, rewind playback and reverse playback of a tape recorded in HDV
standard, the picture may be distorted.
Open the terminal cover
CV-250F
DV Cable (optional) or
commercially available
6 pin-6 pin DV cable
mode only).
VIDEO 2 terminal*
STV-290N Stereo Video Cable
(supplied)
Signal flow
4-pin
6-pin
INPUT
Yellow
VIDEO
White
L
AUDIO
Red
R
34)
81