Reviewing A Still Image Right After Recording - Canon XH A1S Instruction Manual

Screen Displays during Still Image Recording
Metering Mode Icon (
Indicates the metering mode currently selected for recording
still images.
Drive Mode Icon (
Indicates the drive mode currently selected for recording still
images.

Reviewing a Still Image Right After Recording

You can select to display a still image for 2, 4, 6, 8 or 10 seconds after it has been recorded.
MENU
CAMERA SETUP
( 27)
Open the menu and select [CAMERA SETUP]. Select [REVIEW], select a setting option
and close the menu.
Regardless of the [REVIEW] setting, a still image is displayed as long as you hold the PHOTO
button after recording.
The still image operations menu appears when you press the SELECT/SET dial while you are
reviewing a still image or right after recording one. In this menu, you can protect (
( 122) the image.
The [REVIEW] setting is only available when the drive mode is set to
116
118)
117)
REVIEW •••••••2sec
Image Quality and Size
Indicates the quality and size currently selected for recording
still images.
Remaining Number of Still Images that can be
Recorded on the Memory Card
flashing in red: No card
in green: 6 or more images
in yellow: 1 to 5 images
in red: No more images
• The indication may not decrease even though a recording has been
made, or may decrease by 2 images at once.
• All indicators are displayed in green when a memory card is played
back.
" " Card Access Display
Indicates that the camcorder is writing on the memory card.
123) or erase
(single).