Memory Card - Canon VIXIA HF R10 Instruction Manual

FUNC. [
Initialization method
* Press to cancel the complete initialization while it is in progress. All recordings
will be erased and the memory can be used without any problem.
Options
[Quick Initialization]
physically erase the stored data.
[Complete Initialization]
IMPORTANT
• Initializing the memory will permanently erase all recordings. Lost origi-
nal recordings cannot be recovered. Make sure you save important
recordings in advance using an external device (
• Initializing a memory card will permanently erase any music files you
may have transferred to the card.
come pre-installed in the built-in memory will be restored after it is initial-
ized.
• Windows users: Use the supplied software ImageMixer 3 SE to trans-
fer music files from the supplied Camcorder Supplemental Disc to the
memory card again. For details, refer to the 'ImageMixer 3 SE Software
Guide'.
• Mac OS users: Use the Finder to transfer music files from the [MUSIC]
folder on the supplied Camcorder Supplemental Disc to the memory
card after it is initialized. Refer to
folder structure of the memory card.
• At the time of purchase, Eye-Fi cards contain the necessary network
configuration software. Be sure to install the software and complete the
required configuration setup before you initialize the Eye-Fi card prior to
using it with this camcorder.
Menu] [Initialize
Clears the file allocation table but does not
Erases all data completely.
]
[Yes]* [OK]
/ The music files that
About the music files
FUNC.
111).
( 177) for the
Preparations
39