Pre-Recording Function; Self Timer - Canon VIXIA HF R10 Instruction Manual

Pre-recording Function

The camcorder will start recording 3 seconds before you press
START/STOP
, ensuring you do not miss important shooting opportuni-
ties. This is especially useful when it is difficult to predict when to start
recording.
Operating modes:
1 Open ( ) the joystick guide.
2 Select ( ) [
• appears.
• Press
START/STOP
3 Press
The scene recorded in the memory will start 3 seconds before
START/STOP
NOTES
• While pre-recording is activated, the camcorder will not emit any notifi-
cation sounds.
• The camcorder will not record the full 3 seconds prior to pressing
START/STOP
turned on pre-recording or having finished the previous recording.
• Any of the following actions will deactivate the pre-recording function.
- Leaving the camcorder without any operation for 5 minutes.
FUNC.
- Pressing
- Setting the camcorder to standby mode.

Self Timer

Operating modes:
FUNC.
[
FUNC.
appears.
Pre REC] and press
again to turn pre-recording off.
.
was pressed.
if the button was pressed within 3 seconds of having
, ,
Menu]
.
or VIDEO SNAP
[Self Timer]
Pre REC
.
[On ]
Video
59