Selecting The Playback Starting Point - Canon VIXIA HF R10 Instruction Manual

NOTES
• When an external microphone is connected to the camcorder,
[Wind Screen] will automatically be set to [
• If the audio level is too high and the sound gets distorted, turn on the
microphone attenuator with the
or adjust the audio recording level manually (

Selecting the Playback Starting Point

If you have a very long scene, you may
want to start playing back the scene
from a certain point. You can use the
movie timeline to break the scene to
segments at fixed time intervals rang-
ing from 6 seconds to 6 minutes. If you recorded movies with the Face
Detection function (
into segments every time the camcorder registered a change in the
main subject of the scene.
Operating modes:
Movie Timeline
1 Open the original movies or playlist index screen.
• /
or on the memory card.
• To open the playlist index screen from the original movies index
screen:
- /
For scenes on the memory card, press
[Playlist].
- Press
2 Select ( ,
• The [Timeline] screen appears. The large thumbnail will show the first
frame of the scene. Below it, the timeline ruler shows frames taken
from the scene at fixed intervals.
DISP.
• Press
62) activated, you can display the scene divided
You can select the original movies in the built-in memory
For scenes in the built-in memory, press
PLAYLIST
.
) the scene you want to view and press
again to return to the index screen.
Off
[Microphone Attenuator] setting
68).
INDEX SEL.
].
INDEX SEL.
.
and then select
DISP.
.
71
Video