Using the Wink Self-Timer
Point the camera at a person and press the shutter button fully. The camera
will shoot approximately two seconds after it detects a wink.
What if a wink is not detected?
•
Wink a bit slowly.
•
A wink may not be detected if eyes are covered by hair or a hat, or when wearing
glasses.
Changing the number of shots
After choosing
Choose
●
Follow Steps 1 – 2 on p. 59 to choose
then press the l button.
Press the qr buttons or turn the  dial to
●
choose
Compose the shot and press the
shutter button halfway.
●
Confirm that a green frame appears around
the face of the person who will wink.
Press the shutter button fully.
The camera will enter shooting stand-by,
and [Wink to take picture] will appear on
the screen.
The lamp will blink and the self-timer
sound will play.
Face the camera and wink.
The shutter will release approximately 2
seconds after a wink is detected from the
person with a frame around the person's
face.
To cancel the countdown, press the p
●
button.
in Step 1, press the op buttons.
.
, then press the l button.
,
63