Checking The Focus - Canon PowerShot SX130 IS User Manual

Checking the Focus

You can magnify the area of a recorded image that was inside the AF Frame,
or the area of a face that was detected, to check the focus.
114
Press the l button to switch to
the focus check display (p. 42).
●
For images with detected faces, you can
also switch to the focus check display by
pressing the 0 button.
A white frame will appear where the AF
frame or face was when the focus was set.
A gray frame will appear on a face
detected during playback.
The area within the orange frame appears
magnified.
Switch frames.
Move the zoom lever toward k once.
●
The screen shown to the left will appear.
● Press the 0 button to switch between
frames on detected faces. Press the m
button to move to other frames.
Change the magnification level or
location.
●
Use the zoom lever to change the display
size, and the opqr buttons to change
the display position while checking the
focus.
● Pressing the n button resets the
display to Step 1.