Duplexing Drive Unit; Removing The Duplexing Drive Assembly; Operation Panel Unit; Detaching The Control Panel - Canon LBP3300 Series Service Manual

3) Disengage the gear [1].
4) Release the cartridge arm [1].
- A claw [2]
5) Remove the main drive assembly.
- 4 screws [2]
The gear of the main drive assembly is not fixed to the sheet metal. There-
fore, be careful that they do not come apart when removing the assembly.

3.1.7 Duplexing Drive Unit

3.1.7.1 Removing the duplexing drive assembly

1) Detach the right cover. (page 3-1)Reference[Detaching the right cover]
2) Remove the fan assembly [1].
- A piece of wire [2]
- 2 screws [3]
F-3-17
F-3-18
F-3-19
F-3-20
3) Remove the duplexing drive assembly [1].
- 3 screws [2]
The gear of the duplexing drive assembly is not fixed to the sheet metal.
Therefore, be careful that they do not come apart when removing the assem-
bly.

3.1.8 Operation Panel Unit

3.1.8.1 Detaching the control panel

1) Detach the control panel [1]
- 2 claws [2]
- A connector [3]
0011-5164
When detaching the control panel, be sure not to lift it up too much after re-
leasing the claws as a connector is connected to the panel.
Chapter 3
F-3-21
F-3-22
F-3-23
F-3-24
0011-5004
3-3