Yamaha Venture Lite PZ50RTB Owner's Manual page 77

1. Drive track deflection
2. Slide runner
Standard drive track deflection:
30.0–35.0 mm (1.18–1.38 in)
3. If the deflection is incorrect, adjust the
drive track.
Adjusting the drive track alignment and de-
flection
1. Loosen the rear axle nut.
1. Rear axle nut
2. Lift the rear of the snowmobile onto a suit-
able stand to raise the drive track off the
ground.
3. Start the engine and rotate the drive track
one or two turns. Stop the engine.
4. Align the drive track by turning the left
and right adjusting nuts.
Periodic maintenance and adjustment
2
Drive track Shifted to
alignment
Left adjusting
Turn out
nut
Right adjust-
ing nut
1. Left adjusting nut
2. Right adjusting nut
Shifted to right
1. Forward
2. Gap
3. Slide runner
4. Drive track
5. Slide metal
Shifted to left
right
Turn in
Turn in Turn out
71