Yamaha Venture Lite PZ50RTB Owner's Manual page 57

1. Air filter case cover
2. Fastener
To close the shroud and install the air filter
case cover
1. Insert the projections on the end of the air
filter case cover into the slots in the air fil-
ter case, place it in the original position,
and then tighten the fasteners.
1. Projection on the end of the air filter case
cover
2. Slot in the air filter case
2. Slowly lower the shroud to the original
position, and then hook the shroud latch-
es.
Left side cover
To remove the left side cover
Loosen the fasteners, and then remove the
left side cover.
Periodic maintenance and adjustment
1. Fastener
2. Left side cover
To install the left side cover
Place the left side cover in the original posi-
tion, and then tighten the fasteners.
Right side cover
To remove the right side cover
Loosen the quick fastener screws, and then
remove the right side cover.
1. Right side cover
2. Quick fastener screw
To install the right side cover
Place the right side cover in the original posi-
tion, and then tighten the quick fastener
screws.
Top cover (PZ50RT / PZ50GT /
PZ50MT)
To remove the top cover
Pull up on the rear of the top cover.
51