Error
Name
Code
1212
Watchdog Error
1213
Data Abort Error
1214
Invalid Processor Mode Error
1215
Math Error
1216
Mailbox Error
Description
Indicates printer system was
reset by Watchdog timer;
Subsystem stall failure.
Firmware attempted to load or
store to an invalid address.
Indicates the ARM processor
was in an incorrect mode to
perform the requested
operation.
There is a problem doing math,
such as dividing by zero.
Problem with the internal
mailbox messaging system.
Lexmark Pro700 Series
Action
Technical Support Center:
Unplug the All-In-One from the wall outlet;
wait a few seconds, then plug the All-In-
One back in and turn the power on. If the
problem remains, then replace the USB
cable.
Service:
Replace the system board. See
board removal" on page
Technical Support Center:
Unplug the All-In-One from the wall outlet;
wait a few seconds, then plug the All-In-
One back in and turn the power on. If the
problem remains, then replace the USB
cable.
Service:
Replace the system board. See
board removal" on page
Technical Support Center:
Unplug the All-In-One from the wall outlet;
wait a few seconds, then plug the All-In-
One back in and turn the power on. If the
problem remains, then replace the USB
cable.
Service:
Replace the system board. See
board removal" on page
Technical Support Center:
Unplug the All-In-One from the wall outlet;
wait a few seconds, then plug the All-In-
One back in and turn the power on. If the
problem remains, then replace the USB
cable.
Service:
Replace the system board. See
board removal" on page
Technical Support Center:
The printer will auto reset.
Service:
The printer will auto reset.
Diagnostic information
"System
4-21.
"System
4-21.
"System
4-21.
"System
4-21.
2-7