Using The "Quick-Stop" Feature - Code Alarm Elite CA6155e Owner's Manual

Using the "Quick-stop" Feature

If you want to make a short stop and keep your vehicle running (to keep the interior
warm or cool), the quick-stop feature allows you to do this while keeping your vehicle
secure and your keys with you.
To engage Quick Stop:
1. Stop the vehicle and place the transmission in PARK.
2. With your foot off the brake pedal, press and release the
times within 2 seconds. The LED will flash 3 times to confirm quick
stop is entered.
3. Remove the keys from the ignition and exit the vehicle. Press the
button to lock the vehicle's doors if desired.
To engage Quick Stop - Manual Transmission Vehicles:
1. With the vehicle running, foot off the brake, parking brake set ON.
2. Press and release the
3. Exit the vehicle close all doors (Door Open/All Doors Close)
4. Press and release the
5. Within 3 seconds press the
The unit enters Quick Stop Mode and will remain running
until remote start time-out and then shut down. (Remote Start Ready
Mode is NOT active)
Note: Do not leave children or animals unattended in the vehicle when using the
quick-stop feature.
2020 Voxx Electronics Corporation. All rights reserved.
button to activate remote start.
button.
button:
button 2
9