Hotpoint HDM67G9C2CB/UK Installation Manual page 20

Whirlpool EMEA S.p.A.
Via Carlo Pisacane n.1
20016 Pero (MI), Italy
VAT number: IT00693740425
www.hotpoint.co.uk
20
Position the gas connection point such that it is located within the shaded area,
and the hose also hangs naturally within the shaded area.
There are 2 spacers on the rear panel of the appliance (see Fig 1)
intended to prevent the appliance trapping the flexible hose.
If the flexible hose and it's rigid pipework connections are recessed,
the spacers can be removed by the installer to allow the appliance
to be pushed back further in the aperture. This can only be done
if the requirements of BS 6172:2010 can still be met.
Connecting to gas supply
Hot parts
Installation area
Brown
(red)
-
12/2021 W11511490 W11511490
XEROX FABRIANO
Blue
Earth
(black)